Introducing Idrosave, Labocosmetica's new DYI Rinseless wash has finally arrived on Irish shores. Idrosave is a pH neutral solution that safely washes and protects exterior surfaces by also adding gloss to your paintwork. Rinseless washes are particularly useful for those of you that don't have access to an outdoor tap or power, but still want to care for your car. Just add a bucket, plush microfibre and/or pump sprayer.
Idrosave is best used on light dirt/dust. If your car has heavy dirt or road grime, we'd recommend at least a traditional pre-wash using a pressure washer or, ideally, use Labocosmetica Preludio pre-wash to make the whole wash experience even safer. You can of course take Idrosave with you to your local DIY car wash.
How to use Labocosmetica Idrosave
Prepare a bucket equipped with a Grit Guard and dilute Idrosave in water at a ratio of 1:250. This means 20ml of Idrosave for every 5 litres of water. Use our handy Liquid Elements measuring cup to help you with this.
Take your pump sprayer and fill it with the freshly prepared solution - you can dip the bottle into your bucket, or simply make up a dedication mixture. So, if your pump sprayer has a 2 Litre capacity, you'll need ~8ml of Idrosave - making this product incredibly economical!
Next, spray your Idrosave solution onto a section of the car to be cleaned to soften mild dirt and dust. We recommend to clean one panel at a time.
Let Idrosave soak on your panel while you start to prepare your mitt or sponge. Take your soft microfibre towel or suitable rinseless wash sponge and dip into your bucket. Wring it out so that the product does not run off but ensure the towel is still wet enough.
Now run the towel or sponge over the car gently, without applying pressure and making a round upward movement with your hand. This way a clean section of the microfibre towel will touch the paintwork.
Use one side of the microfibre towel only and then take the next side. Once all sides of the towel have been used and the panel is clean, take your drying towel and dry that section.
Before a starting with your next section, rinse your microfibre towel or sponge thoroughly, ensuring not dirt is left in the fibres.
Once dry, you'll notice your paintwork is far more vibrant and is left with a layer or protection - this will make future washes easier.
Why was Idrosave developed?
Labocosmetica’s vision for Idrosave rinseless wash is to fill the gaps found in other products on the market by offering something truly unique, superior and unconventional. Idrosave is probably the best DYI Rinseless solution available with the added security of Preludio pre-wash.
Idrosave stands out for its exceptional softening and cleaning capacity thanks to an innovative combination of cationic and non-ionic surfactants, guaranteeing unparalleled cleaning compared to other products available on the market.