Absolute Control, Perfect Positioning.
Labocosmetica ARMORIUS PPF Slip Solution is a professional-grade formulation engineered for paint protection film (PPF) and vinyl wrap installation. Unlike generic soaps or baby shampoos, it uses a pharmaceutical-grade non-ionic surfactant matrix designed specifically for detailing professionals who require surgical precision.
Why Choose ARMORIUS Slip Solution?
- Cushion Effect: Creates a stable hydrodynamic cushion for effortless, millimetric film positioning.
- Lock-on-Demand Technology: The solution collapses instantly under the mechanical pressure of a squeegee, expelling the liquid completely to lock the adhesive in place.
- Zero Residue: Eliminates the risk of trapping oils or polymers, preventing early lifting, hazing, or yellowing.
- Ultra-Concentrated (1%): Just 10ml makes 1L of active solution. Fully compatible with all PPF and vinyl wrap brands.
Ideal Use Cases
- PPF installation on complex bonnets and bumpers.
- Vinyl wrap and graphics application.
- Window tint film installation.
- Highly curved surfaces where repositioning is critical.
Scientific Comparative Analysis
The following table highlights the fundamental differences between Slip Solution and the empirical methods commonly used:
| Parameter | Slip Solution | Soapy Water | Baby Shampoo |
|---|---|---|---|
| pH | 7-8 (balanced) | 9-11 (variable) | 6-7 |
| Residues | Zero | Possible | Oils/Lanolin |
| Dosage control | Precise (1%) | By eye | By eye |
| PPF compatibility | 100% | Risky | Poor |
| Silvering risk | None | Medium-High | High |
| Cost per liter | Low | Negligible | Very low |
Technical Specifications
| Property | Specification |
|---|---|
| pH Level | 7–8 (balanced, compatible with acrylic adhesives) |
| Density | 1,017 g/mL |
| Surfactants | Non-ionic, pharmaceutical grade |
| Dilution Ratio | 1:100 (10 ml per 1 L of water) |
| Yield | 500 ml = ~50 L of ready-to-use solution |
Quick Application Guide
- Dilute: Mix 8–12 ml of solution per 1 litre of distilled water (avoid tap water due to minerals/limescale).
- Mix: Gently shake the spray bottle to homogenise without creating excessive foam.
- Prep: Thoroughly clean and decontaminate the car's surface.
- Spray: Generously spray the solution onto the bodywork and the film's adhesive side.
- Position: Align the film freely across the panel.
- Set: Squeegee from the centre outward to expel the liquid and activate the adhesive bond.
Pro Tip: On very hot days, increase the dose up to 15 ml/L to slow drying and extend your positioning time.
Download Labocosmetica ARMORIUS PPF Slip Solution Safety Data Sheet (SDS)