The Ultimate Time-Saving Primer for Ceramic Coatings
Labocosmetica FIERO is an innovative, water-based super finish polish engineered specifically as a primer for nano-ceramic coatings and sealants. Free from waxes, silicones, resins, or fillers, FIERO permanently removes micro-defects rather than masking them, leaving behind a pure, mirror-like finish with exceptional depth of gloss.
Key Advantage: No Panel Wipe Required
Unlike standard finishing polishes or resin-based primers, FIERO requires no panel wipe phase (such as #VERITAS or IPA) before coating application.
- Zero Wait Time: You can apply your ceramic coating or sealant (such as Labocosmetica CUPIDO) immediately after polishing - eliminating the standard 6 to 12-hour waiting period required by resin-heavy primers.
- Swirl-Free Prep: Skipping the solvent wipe-down stage reduces towel contact, eliminating the risk of re-introducing micro-marring on soft or sensitive paintwork.
Advanced Engineering & Features
- S.A.M. (Self Assembled Monolayer) Technology: Creates an active chemical bridge between the clear coat and the ceramic coating for maximum adhesion and durability.
- Adaptive Abrasive Technology: Features synthesised abrasives that adjust to the paint surface. It delivers an unblemished finish on soft, sticky, reflow-sensitive paints as well as ultra-hard clear coats.
- 2-Step Correction System: On hard or ceramic paint finishes, pair FIERO with Labocosmetica AUDACE heavy compound to complete the full correction and priming process in just two steps.
- UV Curing Compatible: Completely stable under UV curing lamps without any loss of gloss or clarity.
- Detailer Safety: Completely odourless and 100% VOC-free.
How to use Labocosmetica FIERO
- Pad Choice: Pair with a medium-soft yellow refinishing pad or soft black super refinishing pad.
- Machine Setup: Use a Dual Action (Random Orbital) polisher.
- Application: Work a 40cm x 40cm area at a constant speed (approx. speed setting 4.5) until the polish is fully worked down.
- Final Wipe: Gently buff off remaining residue with a clean microfibre cloth and apply your chosen ceramic coating straight away - no panel wipe required.
