Labocosmetica RENOVA is a unique acidic pH Traffic Film Remover (TFR) shampoo, developed specifically for paint protection films (PPF) and vinyl wraps. As the first product of its kind, RENOVA combines the power of a prewash TFR with the lubrication and safety of a premium shampoo, offering deep, controlled cleaning without harming sensitive surfaces.
Unlike traditional alkaline prewashes or basic acidic descalers, RENOVA acts intelligently and selectively. It penetrates the micro-pores of heat-sensitive, elastic film materials to lift embedded traffic film, oxidation, mineral deposits and carbon-based grime. RENOVA restores the surface clarity and chemical integrity of wraps and PPF, removing contaminants that regular shampoos can’t reach.
Its VDA-certified formula produces a thick, protective foam that minimises friction and micro-marring during washing. It’s fully compatible with gloss, satin and matte finishes, and can be used on sensitive paint and contaminated wheels as well.
Benefits
- Deep, targeted cleaning of PPF and wraps
- Removes embedded traffic film, limescale and oxidation
- Highly lubricated foam minimises risk of scratching
- Safe for gloss, matte and satin finishes
- Ideal as a maintenance shampoo or intensive treatment
- VDA-certified for use on heat-sensitive surfaces
- Works in synergy with Labocosmetica LIBERA as part of the 2pH+ wash cycle
Directions
Always test on delicate surfaces before use
Manual Wash (1:50)
- Dilute 20ml RENOVA in 10L of water
- Apply with a high-lubrication microfibre mitt
- Work from top to bottom in sections
- Rinse thoroughly and dry with a clean cloth
Intensive Spot Treatment (1:10)
- Dilute 100ml in 1L of water
- Apply to areas affected by mineral build-up or limescale
- Let sit for no longer than 60 seconds
- Rinse immediately
Maintenance Shampoo for PPF (1:200)
- Dilute 5ml per 1L (50ml in 10L) of water
- Apply to pre-wetted surfaces with a mitt or sponge
- Work evenly and rinse thoroughly
Mitt Booster (1:5)
- Dilute 200ml in 1L of water
- Pour solution directly onto the mitt
- Wipe over surface section by section
- Do not allow to dry. Rinse off straight away
Degreasing Spray (1:5)
- Dilute 200ml in 1L of water
- Spray onto wheels or contaminated areas
- Agitate with a soft-bristle brush
- Rinse thoroughlyAlways test on delicate surfaces before use
Note: Avoid using on hot panels or in direct sunlight. Always check surface compatibility before applying.
Labocosmetica RENOVA is the essential solution for deep cleaning and maintaining delicate films and coatings. It offers unmatched effectiveness without compromising surface integrity.