Pearl Sponge Applicator Ice Grey: Even Coverage for Coatings, Waxes and Dressings
The Pearl Sponge Applicator from The Rag Company is a foam applicator wrapped in tightly woven pearl-weave microfiber. It's made for one job: spreading ceramic coatings, sealants, waxes and dressings in a thin, even layer, on the outside and the inside of your car. You get 8 applicators in Ice Grey, each 5 x 10 cm, so there's always a fresh one ready for the next product or the next car.
The soap bar shape sits comfortably in your hand, so you keep control on big flat panels and around edges, badges and trim. Built tough, so you can wash them and use them again.
Why Detailers Pick the Pearl Sponge Applicator
- Tightly woven pearl weave: 80/20 microfiber with a smooth, low-pile surface that helps you lay down a thin, even layer of product.
- Made for ceramic coatings: gives you the control you need for the thin, uniform layers coatings demand.
- Interior and exterior: use it on paint, glass, wheels, trim, plastics and leather with the matching product.
- Soap bar shape: fits your hand naturally, so you stay comfortable and in control on a full car.
- Durable: built to handle many uses and washes.
- 8-pack: one applicator per product, so you never mix your wax with your coating or your tyre dressing.
How to Use the Pearl Sponge Applicator
- Start with a clean, dry and decontaminated surface.
- Put a few drops or sprays of product on the pearl surface. For a coating, prime the applicator with a line of product first.
- Work one small section at a time, about 50 x 50 cm, in overlapping straight lines. First side to side, then up and down.
- Level or buff off with a clean microfiber towel, following the instructions of your product.
- Use a separate applicator for each product.
Product Specifications
- Type: foam applicator with pearl-weave microfiber cover
- Microfiber blend: 80/20
- Colour: Ice Grey
- Size: 5 x 10 cm per applicator
- Contents: 8 applicators
- Weight: approx. 100 g per pack (approx. 12 g per applicator)
- Use: ceramic coatings, sealants, waxes, dressings, interior and exterior
FAQs
What is a pearl-weave applicator?
Pearl weave is microfiber woven in small, tight loops. The result is a smooth, low-pile surface that keeps product on top of the applicator instead of burying it deep in the fibres, so it spreads in a thin, even layer.
Can I use the Pearl Sponge Applicator for ceramic coatings?
Yes. That's what it's designed for. The tight weave and firm soap bar shape give you control over thin, even coating layers.
How many applicators do I need for one car?
For a wax or sealant, one applicator usually does the whole car. For a ceramic coating, most detailers use one for the paint and a separate one for glass or wheels. With 8 in the pack, you're set for several jobs.
Can I wash and reuse the applicators?
Maintaining the Pearl Sponge Applicator is a breeze. We recommend using Towel Reset by Liquid Elements microfibre detergent, specially formulated to deep clean and restore absorbency and color to microfibre towels. With this advanced formula, your applicator will stay in top condition for long-lasting performance.
Pro tip: once a ceramic coating has cured inside the applicator, it stays stiff. Use a fresh applicator for every coating job. For waxes, sealants and dressings you can simply wash and reuse.
Can I use it on the interior?
Yes. It works great for applying plastic dressings, trim protectants and leather conditioner.
